[Proprietary mode] How to reset the TX IO to factory settings

Modified on: Mon, 15 Apr, 2024 at 2:23 PM

Press the push button inside the TX IO until LEDs L1 and L2 light up (15s)
Release the push button and wait at least 45 seconds
Restart the product electrically (turn off the power, then re-power) and connect it in Ethernet to the PC
Check that the Ethernet settings on the PC are as follows:
- IP address: 192.168.77.2
- Subnet prefix length: 24
- Gateway: 192.168.77.1Preferred
- DNS: 8.8.8.8
Access the server of the TX IO from your browser at 192.168.77.77