[Proprietary mode] How to reset the receiver to factory settings

Modified on: Wed, 6 Apr, 2022 at 3:21 PM

Power down the receiver
Set the rotary switch to position D
Power up the receiver and wait for at least 30s
Power down the receiver
Set the rotary switch back to position 0
Re-power the receiver and connect it in Ethernet to the PC
Check that the Ethernet settings on the PC are as follows:

IP address: 192.168.77.2
Subnet prefix length: 24
Gateway: 192.168.77.1
Preferred DNS: 8.8.8.8
Access the server from your browser at 192.168.77.77