Enless Wireless
Solution home
Technical Information
LoRa(WAN) range

What are the differences between LoRaWAN and proprietary LoRa?

Modified on: Mon, 22 Apr, 2024 at 5:22 PM

[Proprietary mode] How to reset the receiver to factory settings
[Proprietary mode] What is the default IP address of the receiver ?
[Proprietary mode] What is the maximum pulse count ?
[Proprietary mode] Why is there a red reloading icon next to my transmitter on the IP server of the receiver ?
[Proprietary mode] What is the receiver's power consumption ?
[Proprietary mode] How to decode the contact status of the TX CONTACT in the Modbus table
[Proprietary mode] How to decode the battery status in the Modbus table
[Proprietary mode] How to decode the battery status in the Bacnet objects
[Proprietary Mode] Maximum frequency of Modbus requests
[LoRaWAN] I can't connect my transmitter to the network
[LoRaWAN] ADR management
[LoRaWAN] Which port should downlinks be sent to ?
[LoRaWAN] Behaviour of Joins and LinkChecks
[LoRaWAN] Minimum transmission periodicity
[LoRaWAN] LoRaWAN version
Transmitters calibration
VOC monitoring-related questions
Maximum length of the cable on pulse transmitters
Products warranty duration
Data Encryption
TX Pulse wiring
TX 4-20mA wiring
[Proprietary Mode] How to change the IP address of the receiver ?
[Proprietary Mode] Read the total number of Pulses of a Pulse transmitter in BACnet objects
[LoRaWAN] How to switch from one LoRaWAN network to another ?
Managing and resetting the index of a Pulse transmitter
[LoRaWAN] How to change the transmission period of a transmitter in LoRaWAN?
Compatibility between smart metering transmitters and meters :
Fixed orange LED on my sensor
TX contact wiring

English

Related Articles